Which Chainsaw File Do I Need?

Chainsaw files size chart

• Apr 17, 2019

subsequently, What size file do I use to sharpen my chainsaw? While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32

How do I find the pitch of my chainsaw chain?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2 The rivets are the small, round pegs/studs that hold the chain segments together Measure from the first to the third, then divide that number in half to get your chain pitch

Then, Is it worth sharpening a chainsaw chain? Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades A chainsaw chain can be sharpened multiple times without much of a cost

How many times can you sharpen chainsaw chain? Cutters can be sharpened up to 10 times or more before the chain needs replacing If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar

What’s the difference between 3/8 and 325 chain?

The 325 may be smaller and faster, but it may not be your best bet for your everyday needs The three-eighths-inch chain is durable and lasts longer than its smaller cousin This makes it one of the more popular switches for chainsaw users who want to get more out of their saw

What does 72 mean on a chainsaw chain?

72 = 3/8 pitch 050 gauge or 13mm 73 = 3/8 pitch 058 gauge or 15mm

What pitch is a 325 chainsaw chain?

325″ chain pitch and 13 mm drive link thickness is suitable for felling, delimbing, sawing firewood, and maintaining young stands Its narrower saw kerf enables the

Technical specifications

What chainsaw pitch is best?

A Full Chisel is an aggressive chain on chainsaw bars that are 24”or less When cutting deep, long cuts with a bar longer than 24”, a Chisel Skip Chain is most efficient and aggressive A 404′′ chainsaw pitch is the most aggressive chainsaw chain pitch for professional arborists

What does 91 mean on chainsaw chain?

What size is 3/8 Picco chain?

Exclusive to STIHL: 3/8″ Picco Micro 3 (PM3) saw chain This saw chain was specially designed for light, compact chainsaws and ensures less kickback and lower vibration levels

Technical specifications

Why do Loggers Run chainsaw bars upside down?

Every chainsaw bar has been designed to be mounted right-side up or upside down The reason for this is that it allows the user to extend the life of his chainsaw bar by 50% Flipping the bar will give the heavily-used areas some relief from wear and tear

What chain do loggers use?

Professional loggers usually go for chainsaws with engine power ranging from 40cc and above, with a guide bar length of 14 inches and more

What makes a chainsaw chain low kickback?

The thicker the chip, the more severe the potential kickback To minimize the possibility of reactive forces, kickback-reducing features on chains limit the amount of fiber that can be hooked by the working corner as it rounds the upper half of the bar tip, which is commonly referred to as the kickback zone

How do you know what size file to use to sharpen a chainsaw?

While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32 Select the correct size for your chain

What is the best angle to sharpen a chainsaw?

Holding the file

• Hold the file handle firmly with one hand and guide the file with the other hand across the cutter on the forward stroke
• Always hold the file at a right angle (90°) to the guide bar
• STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle

Why does my chainsaw blade get dull so fast?

There are several reasons why a chainsaw blade may dull quickly Some common ways are from overuse, steep angled cutting teeth, cutting through dirty wood, or working with difficult wood like hickory, ironwood, and black oak

How many times can you sharpen a chainsaw chain?

A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing It’s mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen

Why does my chainsaw chain dull so quickly?

There are several reasons why a chainsaw blade may dull quickly Some common ways are from overuse, steep angled cutting teeth, cutting through dirty wood, or working with difficult wood like hickory, ironwood, and black oak

How many times can you sharpen a chainsaw blade?

Cutters can be sharpened up to 10 times or more before the chain needs replacing If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar

How tight should you tighten a chainsaw chain?

How do I tell the size of a file?

Locate the file or folder whose size you would like to view Click the file or folder Press Command + I on your keyboard A window opens and shows the size of the file or folder

What is the smallest file size?

File sizes are always measured in bytes A byte is a sequence of 8 bits (and remember, a bit is the smallest piece of digital information, 0 or 1)

What is considered a large file size?

The maximum file size in the FAT32 file system, for example, is 4,294,967,295 bytes, which is one byte less than four gigabytes

Maximum size

How do I change the file size?

To convert larger units to smaller units (ie take a number of gigabytes and convert it down in to megabytes, kilobytes, or bytes) you simply multiply the original number by 1,024 for each unit size along the way to the final desired unit