B.carole- You will need a three-way dimmer and a three-way switch
- This lets you dim from one location and turn the lights on and off from another
- If only one switch controls the light, purchase a single-pole dimmer
- If two switches control a single light or a group of lights, you will need a three-way dimmer
subsequently, Can you have 2 dimmers on the same circuit? You can only have one dimmer per group You can put the dimmer at either location, but not both locations There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit
Can a 3 way switch have a dimmer on both ends?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit The other switches (you can have more than one) must be on-off switches only In this setup, the light level is controlled from a single location, whichever light switch you replace with the dimmer switch
Then, Can you put a dimmer switch on LED lights? Yes, LED bulbs can be used on a dimmer but they need to be listed as dimmable LEDs can still work with incandescent dimmers, but the compatibility is an essential factor Look at manufacturers’ website to figure out the right bulb and dimmer for your home I’ve done all the research, so you won’t have to
Why does my 3-way dimmer switch not work? It sounds like someone has put a single pole switch in a system that needs two three ways Part of the problem is that there needs to be the right wiring between the switches There has to be two hot wires* There also may need to be a neutral wire, depending on the wiring configuration
Can you have 2 dimmers on a 3-way circuit?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit The other switches (you can have more than one) must be on-off switches only
What is the difference between a 2 way and 3-way switch?
A two-way switch turns lights on or off from one location only Light can be turned on or off from 2 locations with a three-way switch
How does a slave switch work?
The Slave switch operates in conjunction with the Master to provide 2-way light switching for example where you want a switch at the top and bottom of a flight stairs for a particular light Only the Live wire will be switched to the load
Can you have a dimmer on a 2-way switch?
If you have a 2-way circuit (where the same lights are controlled by two switches) you must choose a push-on/push-off dimmer and replace one of the switches with that dimmer You can only use one push-on/push-off dimmer in a 2-way circuit It must be used in conjunction with a normal switch
How do you use the master slave power board?
Master / slave power boards Plug the power board into the usual wall outlet and plug the main appliance (the computer or TV) into the ‘master’ socket Then, plug the other appliances (printer, modem, speakers etc) into the ‘slave’ sockets
What is a slave relay?
The Pilot or Slave relay simply “relays” the signal to the high current load The input to the Slave relay can be small but it can control currents up to 100’s of amps
Do both 3 way switches need to be dimmers?
You will need a three-way dimmer and a three-way switch This lets you dim from one location and turn the lights on and off from another If only one switch controls the light, purchase a single-pole dimmer If two switches control a single light or a group of lights, you will need a three-way dimmer
Can you connect 2 dimmers 3 way switch?
3-Way Dimmer Switches When using a 3-way dimmer switch, you should only have one dimmer on the circuit The other switches (you can have more than one) must be on-off switches only
What does L1 and L2 mean on a dimmer switch?
Two way switches have a COM terminal as well as L1 and L2 terminals When L1 is off L2 would be on When L1 is on L2 would be off
Can I use 2/3 way dimmers?
Two dimmers may be installed to control one or more lights as long as the dimmer switches are compatible with each other, such as one being the Master, and the other being the Slave The key here is that you cannot install standard 3 way dimmer switches
What happens if a 3 way switch is wired wrong?
If you don’t correctly connect this wire, then your lights won’t work from more than one switch Grounding the switch: You’ll also need to locate the ground wire and connect it to the switch too This wire is essential as it prevents stray currents from electrocuting surrounding possessions, and family members
Is there a difference between a dimmer switch and a LED dimmer switch?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light
Do I need a special dimmer for LED lights?
Yes, LED lights require a special dimmer An old fashioned incandescent dimmer switch will not work properly with LED bulbs You cannot just simply lower the voltage to the LED driver
Do both 3-way switches need to be dimmers?
You will need a three-way dimmer and a three-way switch This lets you dim from one location and turn the lights on and off from another If only one switch controls the light, purchase a single-pole dimmer If two switches control a single light or a group of lights, you will need a three-way dimmer
Does it matter which wire goes where on a dimmer switch?
It doesn’t matter if you reverse the two switch wires to a single-pole dimmer But if you’re replacing a three-way switch with a three-way dimmer, label the “common” wire (it’ll be labeled on the old switch) when you remove the old switch so you can connect it to the “common” terminal on the dimmer
Why does my 3 way dimmer switch not work?
It sounds like someone has put a single pole switch in a system that needs two three ways Part of the problem is that there needs to be the right wiring between the switches There has to be two hot wires* There also may need to be a neutral wire, depending on the wiring configuration
What happens if you wire a dimmer switch backwards?
This makes things like lamps and many appliances more safe to operate But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward
What are the 3 wires on a dimmer switch?
Single pole switches will have 3 wires: a hot lead wire, a ground wire, and a traveler wire Older homes may only have a hot lead and a ground wire If you have less than three wires, stop and call an electrician
What does L1 L2 and C mean on a dimmer switch?
The wires from your old switch can be connected either way round to the “C” and “L1” terminals of the dimmerswitch If you are using a push-on/push-off dimmerswitch there is a spare terminal (L2) that you will not need to use for a 1-way circuit
George
Add comment